Is there a way to put the dmx values of the control channel of the light into the cue stack.

We do a lot of theatre work and I want to be able to put lamp on, lamp off, reset, and fan commands among others into the cue stack so that the techs don't have to mess around with the console trying to figure it out and getting calls every day of show asking how to turn the lamps on and off....

I would not see why not. As long as those channels show up under the Custom tab it should be easy.

If your lamp channel is 12 and the dmx value is 255 for 10 seconds. I would make a cue that is 11 seconds long with channel 12 at 255 and then a follow cue that took channel 12 to zero.