Switch to full style
Using Vista v2
Post a reply

Rogue 2 Spots not moving after update

Wed Aug 29, 2018 3:56 am

I have 2 Chauvet Rogue 2 Spots in my system. They worked fine before the latest update. Now I only can adjust intensity. No real movement. It does seem that they move but it is real, real slow. Any help appreciated. I have a Vista i3. All other DMX fixtures work fine.
Thanks

Re: Rogue 2 Spots not moving after update

Wed Aug 29, 2018 12:34 pm

sawhite725 wrote:I have 2 Chauvet Rogue 2 Spots in my system. They worked fine before the latest update. Now I only can adjust intensity. No real movement. It does seem that they move but it is real, real slow. Any help appreciated. I have a Vista i3. All other DMX fixtures work fine.
Thanks

Sounds like a motor speed (MSpeed channel) problem. Try clearing the Home preset - Edit Menu > Home > Reset.

Re: Rogue 2 Spots not moving after update

Fri Sep 14, 2018 2:25 am

Navigate to the custom position tab and look for an attribute labeled 'positionMspeed' If this number is 255, set it to 0. If it is at 0, set it to 255. Just be sure to update your home preset when you are finished otherwise that change won't save.

This is typically the correct fix!
Post a reply